Laser Baked Colors 
                    LASER ENGRAVING?   WOULD YOU LIKE COLORS?

LAZERDARC  LASER BAKED COLORS
LAZERDARC colors are dry baking compounds, which do not soak into wood at edge of lasered design like liquid colors.  There are no small bits of masking tape to pull off the centers of small letters etc. as in the case of spray paint.  Laser baked colors do not fill the lasered areas like paint sticks or boot polish but still leave a laser engraved appearance.  Availiable colors are red, blue,green,yellow,gold,silver/grey,white & black.  Works on all wood plaques (including particleboard) and acrylic when laser engraved sufficiently deep to hold enough color.
EASY TO USE
Laser the plaque, clean with furniture polish (Pledge) to remove all smoke residue, brush in powder, squeegee off excess, laser at high speed and low power and clean again with polish.
 
Apply furniture polish & clean		  
Brush on color		  
Squeegee off excess
 
Laser - high speed & low power		  
Brush off		  
Clean plaque
             Kit contains:        1 pound (3 cups) of one color  LAZERDARC, instructions & brushes
                        Or:        three - 4 oz. (3/4 cup) colors of your choice, three sets of brushes & instructions
To order kit, call with credit card or state color and
send $59.00 U.S. check or M.O. to:
Smoke-Wood, Dept D
Post Office Box 826
Elgin, OR  97827
We pay shipping in contiguous U.S.
Call for case prices.
See Order Page for shipping outside continental U.S.